Antelope Audio Eclipse 384 - Manual (Page 31)

5. Monitor Out options:
MUTE: Mutes the selected monitors’ output.
DIM: Dims the output of the current selected monitors by what is selected on the preferences tab
under the monitor dim level (default is -10dB).
MONO: This switches the playback from Stereo to Mono
OSC: Enables the tone oscillator on the selected monitor speakers
6. Monitor Select:
Here you can select the pair of monitors you want to listen to, adjust the volume from the Main
Volume control on the center.
7. CUE MIX Source:
Here you select which input will be fed to your cue mix outputs (Rear panel headphones). The fader
below the dropdown menu adjusts the volume of the corresponding source for the Cue Mix.
8. CUE MIX TB Mic Fader:
This fader adjusts the volume of the Talkback Mic for the Cue Mix.
9. CUE MIX Mute:
Mutes the signal fed to the cue mix outputs.
10. CUE MIX OSC:
Sends the Frequency Oscillator signal to the cue mix outputs.
11. Talkback button:
Press to talk from your talkback microphone connected on the rear panel, to the Cue Mix outs. Left
click enables the talkback instantly, and right click enables it permanently.
2
32