Antelope Audio Eclipse 384 - Manual (Page 26)

7. Digital Out Source:
Select the digital source that will feed the digital out to the rear panel of the Eclipse 384.
8. OSC Option:
Enables the oscillator on the selected Digital Output.
9. USB Source:
This dropdown menu allows you to select what will be fed to your USB.
NOTE: If A/D is selected, the Clock setting must be set on OVEN with the same sample rate setting
(matching the source you have selected on the USB dropdown menu). The USB is always the
master and it cannot be slaved to any other source.
10. OSC Option:
Enables the oscillator on the USB Output
2
27