Antelope Audio Eclipse 384 - Manual (Page 11)

5. Go to the Clock tab and under the selected clock for the conversion, select the desired
sample rate.
6. If you want to monitor the converted signal, go to the Monitor tab and in the Monitor Source
dropdown menu, select A/D.
7. The converted signal will be output from the A/D Outputs on the rear panel of the device.
(NOTE that for 384kHz it will be automatically dual-wired using both outputs 1 and 2 as for
L and R).
4.4 Quick Start for D/A Conversion
1. Go to the AD/DA tab.
2
12