Antelope Audio Eclipse 384 - Manual (Page 17)

7. Preset buttons
Five Preset buttons store and recall your ‘favorite’ set-ups. For more information see page 34,
section 11.
The Preset buttons can also be used to take you through a range of other option screens:
1. Hold down Preset button 1 and press the Power button to display the
device information screen (See Device Information, page 40) To return
the device to operation mode, click any other Preset button (apart from
1).
2. Hold down Preset button 2 and press the Power button to display the
Calibration Mode screen (See Calibration Mode, page 39) To return the
device to operation mode, click any other Preset button (apart from 2).
3. Hold down Preset button 3 and press the Power button to display
the use of the current USB Mode. You can change the USB Mode by
pressing Preset button 3 (and cycling through the options). To return the
device to operation mode, click any other Preset button (apart from 3).
4. Hold down Preset button 5 and press the Power button to restore
your stored presets to the factory settings.
To return the device to operation mode, click any other Preset button
(apart from 5).
A further screen appears automatically to confirm that your Factory
presets have been restored.
2
18