DJI Naza-M Lite - Manual (Page 15)

©2014 DJI. All Rights Reserved. 15
3 RC
STEP1: Receive Type
Choose the type of receiver connection that you have installed. Connect your receiver to the main controller in
accordance with the connection diagram.
STEP2: Command Sticks Calibration
Slides Moving Definition ：
T : If you pull the throttle stick to low position, the Slide will move to the left and the craft is down, Moving
the Throttle stick up the slide will move to the right is craft will lift off the ground;
R : If you move the rudder stick to the Left the Slide will move to the left, this is nose left, When you move
the rudder to the Right the slide move to the right, this is nose right;
E : If you move the Elevator stick down the Slide will move to the left and the craft will move back, Moving