2 f/s, Notices – DJI Naza-M Lite User Manual
Page 23
©2014 DJI. All Rights Reserved.
23
2 F/S
Enhanced Fail-safe method will be triggered when MC loses the control signal, no matter what mode you fly. This
could be one of the following situations:
1)
Signal lost between transmitter and receiver, e.g. multi-rotor is out of the communication range, or transmitter
is down, and so on.
2)
One or more connections of A, E, T, R, U channels between MC and receiver loses. If this happens before take-
off, motors will not work if you push the throttle stick; if this happens during the flight, LED yellow light will
flash to warn in addition to the failed-safe method.
Choose one method for your failed-safe function: Landing or Go Home and Landing.
Landing: the aircraft will land after 6s hovering.
Go Home and Landing: Before takeoff, current position of multi-rotor will be saved as home point by MC automatically
when you push the throttle stick first time after 6 or more GPS satellites are found (
blinks once or no blinking) for
8 seconds.
Notices:
When switch to Manual Mode or Atti. Mode, MC will disengage enhanced failed-safe mode, you can re-gain
control of multi-rotor.