DJI Naza-M Lite - Manual (Page 31)

©2014 DJI. All Rights Reserved. 31
STEP3: Automatic Control Gain
Range: 0 to 100
Adjust the reaction angle of the automatic control. The initial value of 100 is the maximum angle. The larger the gain,
the bigger the reaction angle. Click REV/NORM, and then you can reverse the feedback control directions.
STEP4: Manual Control Speed
Range: 0 to 100
You should assign one of the knobs on your transmitter to the X1 channel for controlling the Pitch direction (angle) of
camera gimbal during flight first. Then adjust the reaction speed of pitch direction manual control; the initial value
100 is the maximum speed.
Notices:
If parameter adjustment was enabled on channel X1, the gimbal manual control via channel X1 will still be on as
well.
Do not use X1 to control gimbal pitch and remote adjust parameters at the same time.
Please reset the Basic Parameters in Autopilot section if there is flight jitter after gimbal is mounted.