Metrohm 845 Eluent Synthesizer - Manual (Page 14)

1 Introduction
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
8
1.4 Safety information
This instrument must only be operated in accordance with the infor-
mation provided in these Instructions for Use.
1.4.1 Electrical safety
While electrical safety in the handling of the 845 Eluent Synthesizer is
assured in the context of the specifications EN / IEC 61010-1, the fol-
lowing points should be noted:
• Electronic parts
Only qualified Metrohm technicians should carry out service work on
electronic components.
• Protection against electrostatic charges
Electronic components are sensitive to electrostatic charges and can
be destroyed by a discharge.
1.4.2 General precautionary rules
• Handling of solvents
Check all lines of the IC system periodically for possible leaks. Follow
the relevant instructions regarding the handling of flammable and/or
toxic solvents and their disposal.