Metrohm 845 Eluent Synthesizer - Manual (Page 56)

5 Annex
845 Eluent Synthesizer / Instructions for Use 8.845.1003
50
5 Annex
5.1 Technical data
5.1.1 Interfaces
USB-connections
USB ports 2 USB downstream ports (type A sockets), each 500
mA, for connecting USB devices.
Controller connection
Controller port USB upstream port with additional signals (mini-DIN
socket) for connecting a computer to control the in-
strument (with 6.2151.000 Cable).
MSB-connections (MSB = Metrohm Serial Bus)
MSB1 Dosino For connecting Dosino 1
MSB2 Dosino For connecting Dosino 2 (if present)
MSB3 Stirrer Connection for built-in stirrer
Stirrer control: switched on/off via «Mix Control» software
(manual or in method).
Selectable speed (15 steps) and direction of rotation.
MSB4 Remote Box For connecting 6.2148.010 Remote-Box for automatic
pH adjustment (see Section 2.6).
Remote boxes are used to address and control external
devices.
5.1.2 Mains connection
Voltage
Frequency
Power consumption
Fuse
100...240 V (± 10%)
50...60 Hz
max. 45 W
electronic overload protection
5.1.3 Safety specifications
Construction and testing As per EN/IEC/UL 61010-1, CSA 22.2 No. 61010-1 pro-
tection class 1
Safety information These instructions contain safety information that must
be observed by the user in order to guarantee the safe
operation of the instrument.
5.1.4 Electromagnetic compatibility (EMC)
Emission Standards complied with:
- EN/IEC 61326
- EN 55022 / CISPR 22
Immunity Standards complied with:
- EN/IEC 61326