Metrohm 845 Eluent Synthesizer - Manual (Page 36)

3 «Mix Control» software
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
30
Active
Only users set to " active " can log in.
Admin.-rights
Only Administrators have the following rights:
• Depot editing (see section 3.4.1)
• System Settings editing (see section 3.4.3)
• Report Configuration editing (see section 3.4.4)
• User administration
• Drawing up and saving methods (see section
3.4.6)
• Signing methods (see section 3.5.1)
• Audit trail opening (see section 3.5.2)
• GLP Manager opening (see section 3.5.4)
• Firmware update (see section 3.5.5)
Inserts a new line in the user table in which a new user
can be defined.
Prints a list with the selected (blue highlighted) users.
Opens the PASSWORD window.
The button Password is only active, if at least one user with Adminis-
trator rights is defined and active.
Define user
After the software has been opened for the first time define an Admini-
strator as the first user:
1. Click on . A new line will be shown.
2. Enter the User and Full name .
3. Activate Active and Admin.-rights .
4. Click on [OK]. The LOGIN window opens.
5. Enter the previously defined User. Leave the Password field
empty.
6. Now edit the password. Click on . The CHANGE
PASSWORD window opens.
7. Leave the Old Password field empty. Enter the required pass-
word under New Password and Confirm Passw... , and click on
[OK]. A return is now made to the LOGIN window.