Metrohm 845 Eluent Synthesizer - Manual (Page 17)

2.4 Dosino(s)/Stirrer connections
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
11
3 Start the «Mix Control» program
• Double click on the icon of the «Mix Control» software.
• The device is recognized automatically.
2.4 Dosino(s)/Stirrer connections
Dosino(s) and stirrer are part of the instrument. The instrument is supp-
lied with them already connected up; these connections should not be
altered.
Correct connection:
Cable markings Connection markings
Dosino 1
MSB1
Dosino 1
Dosino 2
MSB2
Dosino 2
Stirrer
Stirrer
MSB3
2.5 Tubing connections
The drainage tubing (Section 2.5.2) and the component inlets and out-
lets (Sections 2.5.3/2.5.4) must be connected.