Metrohm 845 Eluent Synthesizer - Manual (Page 26)

3 «Mix Control» software
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
20
/ Logout...
Logs out the user. The LOGIN window opens so that an
(active) User can log in.
/ Start
Starts the mixing process.
/ Stop
Stops all actions.
/ Rinse
Starts the rinsing process.
To move the symbol strip, click on the dotted bar and move it to the
desired position. The position is saved.
3.3 Method
3.3.1 General information about methods
The method is configured and shown on the Main Page.
The method is the recipe for preparing the mixture. The amounts/con-
centrations and the Total Volume of the mixture to be produced are de-
fined and saved in the method. The Stirrer Speed and the settings for
the pH-adjustment are also saved with the method.
Number, names and units of the Components are specified in the
Depot.
The calculated volumes of the Components (except for Component 1
see section 3.4.2) are added in succession. At the end Component 1 is
used to fill up to the Total Volume .
3.3.2 Parameters
Current Method [ ]
Name of the currently loaded method.
Description [ ]
Notes about the currently loaded method.
Component X [ ]
Components (see section 3.4.2) with names and units
(they correspond to the Components specified in the
loaded Depot).