Metrohm 813 Compact Autosampler - Manual (Page 15)

2 Installation
813 Compact Autosampler
9
2.2.4 Switching the instrument on/off
The 813 Compact Autosampler is switched on and off using the
mains switch 23 .
2.3 Attaching the accessories
For attaching the accessories at the 813 Compact Autosampler,
proceed in the order described below.
2.3.1 Connecting the keyboard
1
2
Connecting the keyboard
Connect the 6.2142.110 keyboard
to the keyboard connection 28
"Keyboard". For disconnection,
press the plug together slightly on
both sides.
Switch on the instrument
Switch on the 813 Compact
Autosampler with mains switch 23 .
The instrument is initialized and
the lift is raised completely. The
green LED lights up.
Made by Metrohm Herisau Switz erland
Keyboard
Type 1.760.0010 Nr. 0010/01104
Fig. 5 Keyboard connection
2.3.2 Installing the plug cover
To prevent any contamination of the mains and remote connec-
tion by spilled solvents or chemicals, the 6.2752.010 plug cover
must always be installed when operating the 813 Compact
Autosampler!
Install the plug cover 20 in the corresponding guide groove
above mains connection plug 22 and remote connection 19 (see
Fig. 1 and Fig. 2).