Metrohm 760 Sample Changer - Manual (Page 11)

2.3 Arranging the Accessories
760 Sample Changer, Installation 8
2.3.4 Mounting and Setting up the Titration Heads
Macro Titration head
6.1458.010
Micro Titration head
6.1458.020
Mounting screws
M8 Aspiration tip
(also for Macro Titration head)
6.1543.170
Electrode
Rotating nozzle
6.2740.000
Burette tip
6.1543.200
Rod stirrer
2.722.0020
M6 Spray nozzles
(also for Macro-Titration head)
6.2740.020
SGJ14 sleeve
6.1236.020
M8 Thread stopper
4.658.0180
SGJ9 Guide sleeve
6.2709.070
Stirrer propeller
6.1909.020
Note on Macro Titration head
The arrow sign marks the slightly sloped SGJ14 boring, which enables to center a rod
stirrer or an electrode in a narrow titration vessel.
Use only the designated
Micro electrodes with the
Micro Titration head, see
accessory list, page 34.