760 sample changer, 4 remote connections – Metrohm 760 Sample Changer User Manual
Page 14
2.4 Remote Connections
760 Sample Changer, Installation
11
2.4 Remote Connections
Remote
760 Sample Changer
Dosimat
765
776
Titrino
Family
718
719
720
736
751
758
784
785
702
716
Relay Box 731
Valves
Pumps,
e.g. 772
Connecting peripheral instruments to the 760 Sample Changer re-
quires Metrohm cables. Otherwise a safe data transmission may
not be guaranteed.
The required cables are listed in the following table. Details about
the control commands are given in the Instructions for Use of the
corresponding instrument.
Connection of:
Cable ordering no.
Titrino or 692/712/713 pH-Meter/Ionmeter/Conductometer
6.2141.020
Titrino and 765 or 776 Dosimat
6.2141.040
691 pH-Meter
6.2141.060
692 Ionmeter and 765 Dosimat
6.2141.070
678/682/686/672 Titroprocessors
3.980.3640
678/682/686/672 Titroprocessors and 671 Switch Box
3.980.3650
All instruments have to be switched off, before they are connected.
Otherwise the instruments could suffer from damage.