Metrohm 760 Sample Changer - Manual (Page 19)

3.2 Key Functions
760 Sample Changer, Introduction
16
3.2 Key Functions
The 760 Sample Changer operates in two different modes where
the keys provide different functions:
The
Basic Mode starts when the instrument is turned on. The
ready-to-operate status is indicated by the green LED.
Basic Mode:
(after
Power on, green LED on)
START
Starts processing of a sample series.
STOP
RESET
Stops processing of a sample series or initializes the
760 Sample Changer.
HOLD
Interrupts processing of a sample series, green LED
blinks.
START
Continues processing of a sample series.
The
Configuration Procedure starts when the instrument is
switched on with pressing <HOLD> simultaneously. The green
LED blinks once. Now, the method can be selected and working,
rinsing and shift heights as well as the stirrer speed can be de-
fined.
Configuration Procedure:
(after
Power on with <HOLD> pressed, green LED blinks once)
START
Accepts the setting of a value and moves on to the
next value.
HOLD
Learning mode, manual execution of a changer func-
tion for setting a configuration.
STOP
RESET
Cancels a configuration setting and initializes the 760
when <STOP> is pressed twice. Switches back to
basic condition.