Metrohm 760 Sample Changer User Manual
Page 25
Advertising
3.5 The Methods
760 Sample Changer, Introduction
22
Method 4 (for exact sequence, see Appendix, p. 28)
Working procedure with sensor rinsing in the sample beaker using
an external pump.
Procedure:
1. move the sample beaker to the tower
2. run lift to work position
3. switch on stirrer
4. start dosing device
5. wait 10 seconds
6. start titrator
7. await end of determination
8. switch off stirrer
9. run lift to rinse position
10. switch on the external pump
11. await readiness of the pump
12. run lift to shift position
Advertising