Metrohm NIRS XDS SmartProbe Analyzer - Manual (Page 42)

40 ▪▪▪▪▪▪▪
Vision asks if the default directory location is
acceptable.
Click on “Yes”. Vision creates a directory for the
project as shown.
Vision prompts the user to connect to the
instrument. Be sure the instrument is turned on
and is ready.
Click on “Use Existing Data” to postpone
instrument connection. The Project Options must
be verified before connecting.
Click on “Configure”,” Options” to set Project
Options.
Project Options should be set as shown. If they
are not this way, click on the “checkbox” to
select or de-select as needed.
When the Project Options are as shown, click on
“OK”.