Metrohm NIRS XDS SmartProbe Analyzer - Manual (Page 9)

▪▪▪▪▪▪▪ 7
LED Indicators on the Smart Probe Handle
Pass:
The sampled material has passed the ID and Qualification
test (Routine Analysis)
Fail:
The sampled material has failed the ID or qualification Test
(Routine Analysis) This means the material was either not
identified, or was outside of acceptance limits for that
material.
Ready:
The Smart Probe is ready to take a sample scan.
Scan:
Scanning reference or sample.
Enter:
Not used
Ref:
System is ready to scan reference material