Metrohm 919 IC Autosampler plus - Manual (Page 10)

1.3 Intended use
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 ￭￭￭￭￭￭￭￭
919 IC Autosampler plus
1.3 Intended use
The 919 IC Autosampler plus is designed for usage as an automation sys-
tem in analytical laboratories. It is not suitable for usage in biochemical,
biological or medical environments in its basic equipment version.
The present instrument is suitable for processing chemicals and flammable
samples. Usage of the 919 IC Autosampler plus therefore requires the user
to have basic knowledge and experience in handling toxic and caustic
substances. Knowledge with respect to the application of the fire preven-
tion measures prescribed for laboratories is also mandatory.
1.4 About the documentation
CAUTION
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the instrument.
1.4.1 Symbols and conventions
The following symbols and formatting may appear in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Method Dialog text, parameter in the software
File ▶ New Menu or menu item
[Next] Button or key
WARNING
This symbol draws attention to a possible life-threat-
ening hazard or risk of injury.
WARNING
This symbol draws attention to a possible hazard due
to electrical current.