Metrohm 919 IC Autosampler plus - Manual (Page 26)

3.7 Connecting a computer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
18 ￭￭￭￭￭￭￭￭
919 IC Autosampler plus
Figure 11 Mounting the safety shield
3.7 Connecting a computer
The 919 IC Autosampler plus requires a USB connection to a computer in
order to be able to be controlled by a PC software. Using a 6.2151.000
controller cable, the instrument can be connected directly, either to a USB
socket on a computer, to a connected USB hub or to a different Metrohm
control device.
You need administrator rights for the installation of driver software and
control software on your computer.