3 selecting the sample loop, Selecting the sample loop – Metrohm 872 Extension Module User Manual
Page 46
Advertising
4.9 Injection valve
■■■■■■■■■■■■■■■■■■■■■■
38
■■■■■■■■
872 Extension Module IC Module
4.9.3
Selecting the sample loop
The amount of sample solution injected depends on the volume of the
sample loop. The choice is made on the basis of the application. The fol-
lowing sample loops are normally used:
Cation determination
10 µL
Anion determination with suppression
20 µL
Anion determination without suppression
100 µL
Advertising