Sindoh A611dn - Manual (Page 100)

Printer Management
4-
12
Replacing Fuser Cleaning Roller
Replace dirty fuser cleaning roller as explained below.
Please contact or visit your place of purchase.
Caution
- Make sure to switch off the power before replacing the roller. Operating the machine during
replacement may cause serious damage.
- The fuser unit with the cleaning roller is extremely hot Cool down the machine before replacing the roller.
- Do not operate the machine without the cleaning roller. Operating the machine without the roller may
cause serious damage.
Open back cover and replace the cleaning roller.
1 Hold the cleaning roller by the handles on both side and press to eject.
Warning
- After removing the cleaning roller, do NOT insert your hand or other objects inside the square
groove where the roller had been installed.
2 Place the new cleaning roller as shown below and press the places marked by arrows to install.