Sindoh A611dn - Manual (Page 115)

5-
11
Troubleshooting
5
2. Basic Printer Troubleshooting
Sometimes print problems can be easily resolved. Try the below instructions when a problem occurs.
1 See 「 Understanding Printer Messages」 on p.3-14 if the red lamp blinks.
2 Check if the power cord is correctly connected to the printer and wall outlet.
3 Turn on the printer.
4 Check if the switch of the power receptacle is turned off or damaged.
5 Check if other electronic appliances connected to the same wall outlet are working.
6 Check if all parts are properly installed.
7 If the problem persists even after above instructions are followed. Turn off the device,
wait 10 seconds and turn on the device again.
If a problem is not solved even though all above measures have been taken, see another item under
「 Troubleshooting」 p. 5-1 .