Sindoh A611dn - Manual (Page 102)

Printer Management
4-
14
Envelope
You can feed up to 5 envelopes into the MPT.
Use envelop made with 75 - 90g/m2 (20- 24lb) of quality paper.
Do not use the following types of paper.
With metal rings, binding thread, or binding rings
Stuck together
Damaged in any form
Bent sharply
With holes, cuts, or sashes
With a mail stamp
With adhesive material applied on the fold of the envelope
Use an envelope that is not bent, rolled or not discharging any harmful substances at 205℃ (401℉).
If uncertain, check with the envelope supplier.
Select the correct envelope size after setting the tray to Manual and the paper type to Envelope in the
printer driver. Put the folded part of the envelope facing down and have the side with receiver’s address
enter the printer first.
Important
- Depending on the application environment and the envelope state, an envelope may be wrinkled.
Envelope opened a long time ago may be bent or expanded making it difficult to be fed.
In this case, load it after flattening the side of the envelope that will be fed first, especially the corners.
- The printing quality of an envelope is determined by the quality of the envelope.
Use a clean envelope that is not wrinkled, curled or scratched.
- If envelope is wrinkled or crinkled, open the back cover, press the compression lever and retry.
Envelope Print Level