Sindoh A611dn - Manual (Page 11)

3
Before Use
3. Safety Information
Plug the power cord to the wall outlet which is near the device, which is easily accessible and properly grounded.
Do not use or store the device in a wet or humid environment.
Caution Injury Risks
- This product uses laser. The control, adjustment, or operation may result in exposure to harmful
laser emissions.
This product uses a printing media heating method so that gas may be emitted from paper due to
heating. In order to prevent the emission of harmful gas, the section addressing the details on the
selection of printing media in the operating instructions should be understood.
Caution High Surface Temperature
- Inside of the printer may be extremely hot. Let the surface cool before handling to avoid injuries.
Caution Injury Risks
- Follow the below instructions to prevent personal injuries or printer damage before moving the printer.
Switch off the printer using the power switch and unplug the power cord.
Remove all cords and cables from the printer before moving it.
Do not lift the optional feeder and printer at the same time. Lift the printer first, and then use both
side handles to lift the feeder.
Use only the power cord provided with this printer or the one approved by the manufacturer.
Caution Electrical Shock Hazard
- When accessing the system board or installing a memory option device after installing the printer,
proceed after turning off the printer and unplugging the power cord.
If another device is con nected to the printer, turn off the device and separate the cable from the printer.
Caution Electrical Shock Hazard
- The design test of the product was passed and approved by using components meeting strict
international safety standards. The safety function of a part may not be clear.
The corresponding manufacturer is not responsible for the usage of another replacement part.