Sindoh A611dn - Manual (Page 54)

Using the Printer
3-
10
Menu Purpose Value
Paper
weight Paper weight settings Lightweight, *Standard weight, Heavy
*Standard weight: Default
Lightweight: Select if paper is thinner than normal paper.
Select if printing come out distorted.
Heavy: Select if paper is thicker than normal.
Select if the toner does not adhere to the printed image.
You can select options for each paper type.
Select the paper type in “Tray N Type” and “MPT Type”.
Assign
Default Tray Default Tray Settings Select the default tray that will feed paper first; *Tray 1, Tray 2,
Tray 3 or MPT. Trays 2 and 3 only appear when they have been
installed. Tray with the same size and type of paper will auto-
matically be connected.
To cancel automatic connection, change tray settings so that
each tray has a different setting.
(*) is default factory setting.
Default factory setting may be different according to region.
General Menu Settings
Menu Purpose Value
Power Save Time before entering Power Save mode (min.)
* Auto Power Save Mode: An automatic power
saving mode transition function through
analysis/memory of printer usage patterns 0 ~ 240 (Disabled when 0)
* Auto Power Save Mode
Alarm Alarm on/off settings On/Off
Language Control Panel Language Settings *Korean, English
Factory Reset Restore initial factory settings All settings will be cleared.
No/Yes
Print Settings
Menu Purpose Value
Print darkness Print darkness settings 1~10, *6
Print Timeout Standby time until print job is cancelled
(seconds) 0, 20~255, *180, (Function
disabled at 0)
Settings Priority Priority is given to the printer setting or driver
setting. Priority is given to *Driver
settings/ Printer settings
(*) Asterisk is factory default setting.