Sindoh A611dn - Manual (Page 75)

Using the Printer
3-
31
Tray
User can select the paper tray to use for printing. You will only see the options “Auto select”, “Manual Feed”
and “Tray1”. “Tray2 and 3” are optional. If “Tray 2 and 3” are installed, user can select this from the Tray part
of the paper tab after installing “Tray2 and 3” in the “Device Settings” tab. Open the Default Print Setting
window to select the paper setting tab to change below print settings.
Media Type
User can select the type of paper.
1) Printer Setting: follow the printer setting from the printer setting and driver setting.
Check current settings in Print Settings - Setting Priority.
Caution
- For paper types 2) ~11), make sure you change the driver setting in Print Settings - Setting Priority.
2) Standard paper: select this when using standard paper.
3) Thick paper: select this for thick paper or when toner does not adhere properly to images printed.
4) Very Thick paper: select this when toner still does not adhere properly to images printed after selecting
Thick Paper.