Teradek Cube Reference Guide - Manual (Page 14)

Version 2 Dec „11 © Teradek, LLC 2011. All rights reserved.
Page | 14
Decoder
If you purchased your decoder as a „Cubelet‟ (paired with an encoder) there is no additional configuration
required beyond ensuring that the two devices are on the same network (see Connect Cube to Your
Network , page 7). Find instructions for setting your video output resolution and switching between
streams below.
1. Changing output format
1.1. Open your Cube decoder‟s web UI and log into the device.
1.2. Navigate to „Video Setup‟ -> „Device Settings.‟
1.3. Select your desired resolution under „Video Output Format.‟
1.4. Click „Apply.‟
2. Pairing