Teradek Cube Reference Guide - Manual (Page 31)

Version 2 Dec „11 © Teradek, LLC 2011. All rights reserved.
Page | 31
2.1.
2.2. RTSP Announce streaming allows Cube to start and stop broadcasts to a remote streaming
server (such as Wowza). The RTSP announce license is provided by request, free of charge.
2.3. Configuration: Enter the host name or IP address of your server in the „Host Name‟ field. Enter
the host port configured on your server in the „Host Port‟ field (default is 1935). In the „File‟ field,
enter the name of your application and desired stream name. The file will vary based on your
chosen server. For example, if streaming to a Wowza server with an application „live‟ and a
desired stream name „stream1,‟ „live/stream1‟ should be entered in the „File‟ field.
2.4. Using RTSP announce: Once your stream has been configured, start and stop broadcasting to
your server by clicking the „Start‟/‟Stop‟ button on the Stream Settings page, or press and
release the „Go Live!‟ button. The „ENC‟ LED blinks rapidly when starting or stopping a
broadcast.
2.5. User name and password are configurable for streaming servers that require authentication.
3. RTP push
3.1.
3.2. RTP Push streaming allows you to direct video to a server or client and generates an „.sdp‟ file
containing the stream description. SDP files can be stored on a streaming server, or opened by
video players like VLC. The RTP Push license is provided by request, free of charge.
3.3. Configuration: To configure RTP push, select „Enabled,‟ then specify your desired IP address
and port. Click „Apply‟ to save your configuration and generate the SDP file.