Teradek Cube Reference Guide - Manual (Page 25)

Version 2 Dec „11 © Teradek, LLC 2011. All rights reserved.
Page | 25
2.3.1. Basic Operation -- The Decoder Settings page contains two main panels, an available
streams panel, and a cameo panel displaying information about the currently configured
stream.
2.3.1.1. Selecting a video stream – To choose a stream to decode, select your Cube from
the list of available streams to expand the listing. Pick your desired stream (if multiple
streams are available) and drag it into the Channel 1 panel.
After you have dragged the stream across, click „Apply.‟ The decoder will search for
the stream, restart, and begin decoding. Once a stream has been selected, the
decoder will search for the encoder whenever it is restarted. NOTE: HTTP Live
streams are not compatible with the Cube decoder. The decoder Channel 1 panel will
highlight red and you will not be able to apply the stream. Supported stream types are
RTP/RTSP and transport stream.
2.3.1.2. Removing a video stream – To stop the decoder and prevent it from searching
for a video stream, click the button , and then click „Apply.‟
2.3.1.3. Previewing a stream – Click the button to preview the video stream in your
browser. This preview requires the VLC plugin, and may not work in all browsers.
2.3.1.4. Stream info – Additional stream information can be seen by clicking the
button.