Clarinet Systems EthIR LAN - Manual (Page 29)

3-9
SNMP Variables Tab
This tab contains information about SNMP, as illustrated below. The Switch supports,
up to, four SNMP managers. If SNMP is not used, do not modify the information in
this tab section. If SNMP is used, these fields should be set by your system
administrator.
IP Pool Tab (except ESB3011b)
This tab enables you to create a pool of dynamic IP addresses for assignment to
IR/PPP devices as illustrated below:
If you intend to use any IR/PPP devices you must provide IP addresses in the IP Pool
either manually or via DHCP. You can add or delete IP addresses to and from the
pool respectively by clicking Add or Delete and then clicking the Update button.
Alternatively, if DHCP Servers are available, invoking the Use DHCP on this screen
will eliminate the need for managing IP Pool.