Clarinet Systems EthIR LAN User Manual
Page 65
F-15
4. Click OK to return to Make New Direct Connection dialog and click on
TCP/IP Settings…
. Currently, Clarinet supports the specification in the
General TCP/IP
dialog box. Again, no change is required although it
would be helpful to understand what is entailed in these dialogs.
Note: Support of some of the items is negotiated as the connection session begins. The EthIR
Switch from which the EthIR Beam is extended automatically assigns the IP address of your
HPC. SLIP protocol is not supported. Software compression and IP header compression are
negotiated. The EthIR Switch assigns the HPC IP address. Compression is not supported.
5. Click on the Name Servers tab.
6. The domain name server are configured in the Switch and do not have to
be configured into the CE device. The Switch passes all information to the
CE device.