Clarinet Systems EthIR LAN - Manual (Page 30)

3-10
The IP Pool is preset to: 192.168.101.179 through 186 (on 8 port models ES208 and
608) and 192.168.101.179 through 194 (on 16 port models ES216). The one port
ES101 / 301 IP Pool is initially empty since it is factory shipped with the DHCP
option turned on. As a result, it requests an IP from the DHCP server for its IP Pool
and will not be visible in the IP Pool list.
Once you set the appropriate information in this tab, the EthIR Switch automatically
provides a IP Address from the IP Pool to any IR/PPP device that connects to the
network via an EthIR Beam.
The fewer available IP addresses or available EthIR Switch infrared ports determines
how many IR/PPP devices can connect to the system simultaneously. If you add less
IP addresses than there are available ports, the number of IP addresses determines how
many IR/PPP devices can connect to the system at any one time. For example, if your
Switch supports up to eight infrared ports and you or a DHCP server provides only six
IP addresses to this pool, then only six IR/PPP devices can connect to the Switch at
any one time.
After all fields are modified, click the Update button to update the Switch’s IP
information.
Note: If you change the IP address of the Switch, you must reboot the switch by clicking
Reboot. Any infrared communication during reboot will terminate.
RF Card Info (ESB3011B only)
Model ES101 / 301/ 1000 Models ES208 / 216 / 608