Clarinet Systems EthIR LAN - Manual (Page 54)

F-4
5. If the IrLAN connection is successful but only runs at 115Kbps verify your
IR port specification for your notebook. If the port specification is
115Kbps then the notebook installation is complete. If the spec is 4Mbs
and you are only able to connect at 115Kbps, you should request the IR
4Mbs Framer (device driver) from your notebook manufacturer and then
update the Framer (see APPENDIX E) and repeat this section again. In the
meantime, you can continue to use 115Kbps. The installation is complete.
The following figure illustrates the activated Infrared Monitor screen with
successful IrLAN connection.
To interact with your network, you will need to configure the Microsoft IrLAN
Adapter
in your Network Configuration panel with the appropriate TCP\IP
information.
Consult your network administrator for that information.