Clarinet Systems EthIR LAN - Manual (Page 48)

E-2
4. You will see the Wizard display a dialog box informing you that it will install
infrared devices . Click Next and be sure the Infrared Driver for Windows
95 disk is inserted in the floppy drive. Click Have Disk in the
Manufacturers/Model dialog box. Type the path a:\, and click OK.
5. Select the correct manufacturer and model for your notebook and click Next.
Note: If it’s not printed on the notebook housing you can check the documentation, which
came with it or the bottom of your notebook for the model.
6. Select the COM port your notebook uses for Infrared.
Note: When the Add Infrared Device Wizard prompts you to choose the IR-related
communications port to which the IR device is physically connected, click that port in the list
(do not select Virtual COM port if it appears in the list. If you are uncertain which physical
communications port the IR device is using, select the first COM port in the list (for example,
COM1). Then click Next.