Clarinet Systems EthIR LAN - Manual (Page 36)

A-2
5. After making your manufacturer and model selections, click Next.
6. Select the COM port your notebook uses for Infrared.
Note: When the Add Infrared Device Wizard prompts you to choose the IR-related
communications port to which the IR device is physically connected, click that port in the list
(do not select “Virtual” COM port if it appears). If you are uncertain which physical
communications port the IR device is using, select the first COM port in the list (for example,
COM1).
7. Click Next. (CAUTION: if the wrong COM port is selected a reinstallation of
the drivers will be necessary).
If your notebook is not on
the Manufacturers list,
select Standard Infrared
Device, then select Built-
in Infrared port on
notebook or desktop in
the Models list.
Example:
• If your notebook is Fujitsu
735, select SMC IrCC
(Fast Infrared) Hardware
and Driver (COM4).
• If your notebook is
Toshiba 500 Serial, select
Generic IR.