Clarinet Systems EthIR LAN - Manual (Page 52)

F-2
Using IrLAN with Windows 95 Notebooks
In most cases, your portable computer is already configured for use with Clarinet
Systems’ EthIR LAN. As mentioned on the previous page, only minor setup on
your part is required to enable the Infrared Monitor as follows:
1. Open the Infrared Application Program in Windows 95—In the
Start\Settings\Control Panel , double click the Infrared Icon as
illustrated below (If you don’t see the Infrared Icon, skip this section and
go to APPENDIX A)
2. To enable your Infrared Monitor, click Options, as illustrated below
Double
Click