Unitec Wash Select II With WashPay Integration Operations Manual - Manual (Page 31)

W A S H S E L E C T I I
Document Number: WS21058 19
2. Press the (1) button for “YES” or the (3) button for “NO”, and then press the (*)
key.
3. If you selected to enable combo mode, you will be prompted to enter which wash
types (1-4) will be selectable by the customer. Enter (1) “YES” or (3) “NO” for
each prompt that pops up.
4. You are next prompted to enter the default wash if no selection. Press the wash
button corresponding to which wash method you want to give customers as the
default should they fail to make a timely selection after having purchased the
wash. (This “automatic selection” will only work if you have the Auto Select option
(in Customer menu) enabled).
2.5.10 Edit Combo Names
The default names for the two wash methods of combo mode are “Softtouch” and
“Touchfree”.
Refer to Figure 2 for the different characters available for each key. Press each key until the
desired character displayed. Press the (#) key to accept the character and continue to the
next character. When you have finished entering Wash Name, press the enter (*) key.
Figure 2. Alternate Keypad Functions
To change the Combo names:
1. Place the WSII in Setup mode. Scroll to: Wash Interface(*) Edit Combo Names (*)
2. Use the diagram of alternate keypad functions in Figure 2 to assist you in
programming the name of your friction wash method.
3. Again using Figure 2, program the name of your touchfree wash method.
2.5.11 Optioning
The Optioning feature allows you to add options to a wash package. It appears after a wash
selection is made during the normal purchase process. If enabled, any time a wash package
is selected, an option screen will display. Wash upgrades are not permitted when Optioning is
enabled. No wash is armed on code entry until after an option selection is made or declined
and payment is added.
Document Title: WSII Operations Manual ver 6.10