Unitec Wash Select II With WashPay Integration Operations Manual - Manual (Page 39)

W A S H S E L E C T I I
Document Number: WS21058 27
Document Title: WSII Operations Manual ver 6.10
2 . 9 . 6 . 1 R e c e i p t B a r C o d e s
You can program a specific bar code for each wash package to be printed on each receipt.
This allows the attendant to scan the bar code to activate the appropriate wash. Bar codes
can be 1-99999999. To print Bar Codes:
1. Place the WSII in Setup mode. Scroll to: Misc Setup (*) Receipt Bar Codes (*)
2. Press the (1) button to enable bar codes.
3. When you enable bar codes, you will be prompted to “Enter Wash 1 Bar Code.”
Key in a number (up to 8 digits in length) for this wash and press the (*) key to
enter.
4. Repeat step 3 each of the remaining washes.
2.10 Remote Reporting Menu
Reporting functions are handled through the WashPay Server via the Internet. For more
information, please see the Sierra Management Application Programming Manual at
www.StartwithUnitec.com .
2.11 Pass Codes and Pass Cards
The Pass Codes and Pass Cards discussed in this Section provide access to programming
fleet accounts. They are not to be confused with the VIP Pass Cards™ or the Fleet Account
Codes themselves.
This feature allows the owner/operator to gain access to the setup menu and its functions
without opening the unit. Using this feature allows quick and easy management of fleet
accounts, and when used along with the “Fleet Account Profiles” feature you can program a
fleet account in approximately ten seconds. You may configure up to 20 codes/cards and
several of them may perform the same function if you wish. This allows you to give others the
ability to access specific functions without allowing them access to the inside of the unit.
Pass codes and Pass cards may be programmed to complete the following functions:
• Alarm Activation (Opens the Arm//Disarm menu for the Security Alarm Option.)
• REPORTING MENU (Allows access to the entire Reporting Menu.)
o Print Accounting (Allows printing of an Accounting report without the
option of clearing it.)
o Print & Clear Acct (Prints an accounting report with the option to clear it.)
o View Accounting (Allows you to view an Accounting Report without the
option to clear it.)
o View & Clear (Allows you to view an Accounting Report with the option to
clear it.)
• DIANOSTICS MENU (Allows access to the Diagnostics Menu.)