Clover Electronics LCD2084 - Manual (Page 113)

7. Setup
113
By Window Set
Right-click on the setting window for Motion Detection Area ([Fig. 7-75]), and then the pop-
up setting window for Motion Detection Area will be displayed ([Fig. 7-76]).
By clicking the mouse, select the button on the pop-up setting window.
Click one of cells for the starting point of the area which you would like to designate, and
then click the other one of cells for the ending point of area until the motion detection area
is the size you want it to be. The multiple motion areas can be set on each of cameras.
The motion detection by Window Set will be made on the designated area only.
Click the button to return to the MOTION menu.
[Fig. 7-80 Window Set screen]