Clover Electronics LCD2084 User Manual
Page 121
7. Setup
121
7-7.3. Port
▫ PORT is the TCP address of the program, which is used to connect to the network viewer.
It can be set from 1 to 65535 values.
▫ Click the PORT button in the Network menu, then the On Screen Keyboard will show up.
▫ Delete the current port number with the
button and enter the new port number by
using On
Screen Keyboard, and then click “OK” button to set with new port number.
▫ Click the “CANCEL” button to return to the default value.
[Fig. 7-95 Port Setup window]
[Fig. 7-96 Port Setup Keyboard window]
7-7.3.1. Port Forwarding
▫ Router has to be set as a virtual server (or port forwarding) in order to utilize the
MNS (Mac Name Server) or the DDNS service to use Internet Explorer (See section 8-
3) on this product.
▫ Do not use the public port numbers.
7-7.4. MAC ID
▫ MAC ID is connecting address for Ethernet, every unit has 12 digit addresses (HEX 6 byte).
MAC ID was already assigned with the factory default value. User can not change it.