Clover Electronics LCD2084 - Manual (Page 115)

7. Setup
115
By Each Cell
Right-click on the setting window for Motion Detection Area ([Fig. 7-75]), and then the pop-
up setting window for Motion Detection Area will be displayed ([Fig. 7-76]).
By clicking the mouse, select the button on the pop-up setting
window. Click the mouse on each of the cells as much as you would like to designate the
Motion Detection Area.
To clear, click the designated cells.
[Fig. 7-82 Each Cell Setup screen]
▫ Buzzer
Click the buzzer button in the MOTION menu to turn the buzzer “ON” or “OFF”. If the “ON”
is selected, the buzzer will sound when a motion is detected. If the “OFF” is selected, the
buzzer won’t sound.
[Fig. 7-83 Buzzer ON/OFF ]