Clover Electronics LCD2084 - Manual (Page 117)

7. Setup
117
7-6.10. Recording by Sensor (PIR Sensor)
▫ Click the mouse on the button for each of the channels in the RECORD menu, and
then the SENSOR menu will be displayed on the screen as shown in [Fig. 7-84].
▫ Click the (EXIT) button to return to the RECORD menu.
[Fig. 7-84 SENSOR window]
▫ ON/OFF
The system will start recording when an Alarm is detected and the ON is selected in the
SENSOR menu by clicking the mouse. If the OFF is selected, the system won’t be
recording.
If you select “OK”, it will be recorded when only sensor is activated.
[Fig. 7-85 SENSOR ON/OFF button]