Clover Electronics LCD2084 - Manual (Page 155)

8. REMOTE HOST PROGRAM
155
8-4.11. E-Map
E-Map enables users to display the cameras on the digital map for better monitoring.
The digital map should be a BMP file and you can make it (the higher resolution the better) or
use the E-map samples saved in the E-map folder (See Fig.8-26).
[Fig. 8-24 E-Map MODE]
8-4.11.1. Addition of map
- Click the E-Map button on the DvrMaster.
- Right-click the MAP as shown in
[Fig. 8-25] and click “Add eMap” on the pop-up window, and then the BMP files factory saved
will show up (See [Fig. 8-26]).
- Select a BMP file and click “OPEN button in [Fig.
8-26], and then an eMap will be saved under the MAP button.
[Fig. 8-25 Add eMap] [Fig. 8-26 BMP files]
E-Map mode