Clover Electronics LCD2084 - Manual (Page 84)

Stand-alone DVR Instruction Manual
84
7-2.4.1. FACTORY DEFAULT
▫ Click the “FACTORY DEFAULT” button in the SYSTEM CONFIG menu, and you will be
asked as shown in [Fig. 7-15].
[Fig. 7-14 Factory Default button]
▫ Click the “OK” button in [Fig. 7-15] to reset to the Factory Default Values, and then the
system will save the factory default values (settings).
Click the CANCEL button to cancel.
[Fig. 7-15 Confirmation window of Factory Default]