Clover Electronics LCD2084 User Manual
Page 57
6. How to Operate
57
The MOTION (
) or SENSOR (
) as shown in [Fig. 6-30] should be turned ON in
this recording mode.
▫ Press the RECORD button on the side panel or click the RECORD icon on the MENU
window.
[Fig. 6-30 Manual Event Recording setup]
6-9.3. Timer Recording
▫ Click the SETUP icon on the MENU window in the LIVE mode.
▫ Click the RECORD button in the SETUP menu and then the RECORD window will be
displayed.
▫ Select the TIMER RECORDING (
)
between the MANUAL RECORDING (
)
and
the TIMER RECORDING (
) as shown in [Fig. 6-31]. All channels can be set at
the same time by clicking the ALL (
) or each of the channels can be set by
clicking the TIMER RECORDING (
) on the CAM 1 through CAM 8.
The MOTION (
) and SENSOR (
) as shown in [Fig. 6-31] should be turned
OFF
in this recording mode.
▫ Choose one from SUNDAY to SATURDAY in the TIMER menu by clicking the mouse on
(
) that turns to (
). You can choose the value
or
by repeatedly clicking
the mouse.
▫ Click the Hour (or Minute) button in [Fig. 6-33] to setup the Starting Time and Ending Time,
then the Hour (or Minute) table will appear as shown in [Fig. 6-34].
-Click the Hour (or Minute) you wish to set up.
-The recording time can be set in military hour mode (24hour).
▫ Press the RECORD button on the side panel or click the RECORD icon on the MENU
window.
[Fig. 6-31 Timer Recording setup]