Clover Electronics LCD2084 User Manual
Page 56
Stand-alone DVR
Instruction Manual
56
6-9. Record
This system provides Watchdog function.
When power goes off during recording and the power turns on, the system will automatically start
recording.
6-9.1. Manual (Continuous) recording
▫ Click the SETUP icon on the MENU window in the LIVE mode.
▫ Click the RECORD button in the SETUP menu, then the RECORD window will be
displayed.
▫ Select the MANUAL RECORDING (
)
between the MANUAL RECORDING (
)
and the TIMER RECORDING (
) as shown in [Fig. 6-29]. All channels can be set at the
same time by clicking the ALL (
) or each of the channels can be set by clicking
the MANUAL RECORDING (
) on the CAM 1 through CAM 8.
The MOTION (
) and SENSOR (
) as shown in [Fig. 6-29] should be turned OFF in
this recording mode.
▫ Press the RECORD button on the side panel or click the RECORD icon on the MENU
window.
[Fig. 6-29 Manual Recording setup]
6-9.2. Manual Event Recording
▫ Click the SETUP icon on the MENU window in the LIVE mode.
▫ Click the RECORD button in the SETUP menu and the RECORD window will be displayed.
▫ Select the MANUAL RECORDING (
)
between the MANUAL RECORDING (
)
and the TIMER RECORDING (
) as shown in [Fig. 6-30]. All channels can be set
at the same time by clicking the ALL (
) or each of the channels can be set by
clicking the MANUAL RECORDING (
) on the CAM 1 through CAM 8.