Great Plains YP2425A Operator Manual - Manual (Page 130)

126 YP2425A Table of Contents Index Great Plains Manufacturing, Inc.
401-626M Table of Contents Index 2014-02-10
Type 2 Fertilizer Manifold
The Type 2 system includes all plumbing from the
bulkhead at the rear hitch weldment to the row unit drop
lines. The boom systems are separate for each wing.
The system does not include, and requires:
• pump(s), such as the 407-213A Ground Drive pump
on page 125 (one on each wing)
• 401-467A trailer hitch weldment (page 123)
• tank for low-rate fertilizer, such as an SML or the
second tank on a PFC2000 (the PFC1600 has only
one tank, and if used for Type 2 applications, cannot
simultaneously be used for Type 3 applications)
Type 3 Fertilizer Manifold
The Type 3 system includes all plumbing from the
bulkhead at the hitch weldment to the row unit drop lines.
The boom system has separate connections and
sections for each planter section (left, center, right), and
is compatible with point-row operation.
The system does not include, and requires:
• pump, usually provided by the tank
• 401-467A trailer hitch weldment (page 123)
• tank (PFC1600 and PFC2000 both include a Type
3-capable pump).
Fertilizer Orifice Plates
The manifold systems include size 28, 34 and 48 plates.
To order alternate plates, use the following part numbers.
Order one per row unit.
Description Initial Order
Type 2 Fertilizer Manifold Kit 407-215A
Description Initial Order
Type 3 Fertilizer Manifold Kit 407-138A
Orifice Size Great Plains Part Number
20 832-052C
28 832-056C
34 832-053C
48 832-054C
59 832-057C
80 832-055C
98 832-059C
25491 26133
25491
26134
29984