Swath command™ clutch operation – Great Plains YP2425A Operator Manual User Manual
Page 44
40
YP2425A
Great Plains Manufacturing, Inc.
401-626M
2014-02-10
Swath Command™ Clutch Operation
The optional Swath Command™ system replaces the
standard 3-section operator-controlled clutches with 12
sections of clutches under seed monitor control. If you
have the standard clutches, see “Electric Clutch
Operation” on page 39.
The Swath Command™ system automatically turns off
rows when the row unit enters a non-planting area (as
defined by a pre-loaded prescription), or if the row enters
an area already logged as planted during prior passes.
Setup and operation of a factory-installed Swath
Command™ system is covered in a separate manual:
Swath Command™ Section Control, publication part
number 403-857M.
Swath Command™ ordering information is found on
page 130.
Figure 48
Swath Command™ Components
34006